term% cat index.txt SAM(1) General Commands Manual SAM(1)
NAME
sam, B, sam.save - screen editor with structural regular expressions
SYNOPSIS
sam [ option ... ] [ files ]
sam -r machine
sam.save
B [ -nnnn ] file ...
DESCRIPTION
Sam is a multi-file editor. It modifies a local copy of an external
file. The copy is here called a file. The files are listed in a menu
available through mouse button 3 or the n command. Each file has an
associated name, usually the name of the external file from which it
was read, and a `modified' bit that indicates whether the editor's file
agrees with the external file. The external file is not read into the
editor's file until it first becomes the current file—that to which
editing commands apply—whereupon its menu entry is printed. The op‐
tions are
-d Do not `download' the terminal part of sam. Editing will be
done with the command language only, as in ed(1).
-r machine
Run the host part remotely on the specified machine, the termi‐
nal part locally.
-s path
Start the host part from the specified file on the remote host.
Only meaningful with the -r option.
-t path
Start the terminal part from the specified file. Useful for de‐
bugging.
Regular expressions
Regular expressions are as in regexp(6) with the addition of \n to rep‐
resent newlines. A regular expression may never contain a literal new‐
line character. The empty regular expression stands for the last com‐
plete expression encountered. A regular expression in sam matches the
longest leftmost substring formally matched by the expression. Search‐
ing in the reverse direction is equivalent to searching backwards with
the catenation operations reversed in the expression.
Addresses
An address identifies a substring in a file. In the following, `char‐
acter n' means the null string after the n-th character in the file,
with 1 the first character in the file. `Line n' means the n-th match,
starting at the beginning of the file, of the regular expression All
files always have a current substring, called dot, that is the default
address.
Simple Addresses
#n The empty string after character n; #0 is the beginning of the
file.
n Line n; 0 is the beginning of the file.
/regexp/
?regexp?
The substring that matches the regular expression, found by
looking toward the end (/) or beginning (?) of the file, and if
necessary continuing the search from the other end to the start‐
ing point of the search. The matched substring may straddle the
starting point. When entering a pattern containing a literal
question mark for a backward search, the question mark should be
specified as a member of a class.
0 The string before the first full line. This is not necessarily
the null string; see + and - below.
$ The null string at the end of the file.
. Dot.
' The mark in the file (see the k command below).
"regexp"
Preceding a simple address (default .), refers to the address
evaluated in the unique file whose menu line matches the regular
expression.
Compound Addresses
In the following, a1 and a2 are addresses.
a1+a2 The address a2 evaluated starting at the end of a1.
a1-a2 The address a2 evaluated looking in the reverse direction start‐
ing at the beginning of a1.
a1,a2 The substring from the beginning of a1 to the end of a2. If a1
is missing, 0 is substituted. If a2 is missing, $ is substi‐
tuted.
a1;a2 Like a1,a2, but with a2 evaluated at the end of, and dot set to,
a1.
The operators + and - are high precedence, while , and ; are low prece‐
dence.
In both + and - forms, if a2 is a line or character address with a
missing number, the number defaults to 1. If a1 is missing, is substi‐
tuted. If both a1 and a2 are present and distinguishable, + may be
elided. a2 may be a regular expression; if it is delimited by the ef‐
fect of the + or - is reversed.
It is an error for a compound address to represent a malformed sub‐
string. Some useful idioms: a1+- (a1-+) selects the line containing
the end (beginning) of a1. 0/regexp/ locates the first match of the
expression in the file. (The form 0;// sets dot unnecessarily.)
./regexp/// finds the second following occurrence of the expression,
and .,/regexp/ extends dot.
Commands
In the following, text demarcated by slashes represents text delimited
by any printable character except alphanumerics. Any number of trail‐
ing delimiters may be elided, with multiple elisions then representing
null strings, but the first delimiter must always be present. In any
delimited text, newline may not appear literally; \n may be typed for
newline; and \/ quotes the delimiter, here Backslash is otherwise in‐
terpreted literally, except in s commands.
Most commands may be prefixed by an address to indicate their range of
operation. Those that may not are marked with a below. If a command
takes an address and none is supplied, dot is used. The sole exception
is the w command, which defaults to 0,$. In the description, `range'
is used to represent whatever address is supplied. Many commands set
the value of dot as a side effect. If so, it is always set to the `re‐
sult' of the change: the empty string for a deletion, the new text for
an insertion, etc. (but see the s and e commands).
Text commands
a/text/
or
a
lines of text
. Insert the text into the file after the range. Set dot.
c
i Same as a, but c replaces the text, while i inserts before the
range.
d Delete the text in the range. Set dot.
s/regexp/text/
Substitute text for the first match to the regular expression in
the range. Set dot to the modified range. In text the charac‐
ter & stands for the string that matched the expression. Back‐
slash behaves as usual unless followed by a digit: \d stands for
the string that matched the subexpression begun by the d-th left
parenthesis. If s is followed immediately by a number n, as in
s2/x/y/, the n-th match in the range is substituted. If the
command is followed by a g, as in s/x/y/g, all matches in the
range are substituted.
m a1
t a1 Move (m) or copy (t) the range to after a1. Set dot.
Display commands
p Print the text in the range. Set dot.
= Print the line address and character address of the range.
=# Print just the character address of the range.
File commands
* b file-list
Set the current file to the first file named in the list that
sam also has in its menu. The list may be expressed <Plan 9
command in which case the file names are taken as words (in the
shell sense) generated by the Plan 9 command.
* B file-list
Same as b, except that file names not in the menu are entered
there, and all file names in the list are examined.
* n Print a menu of files. The format is:
' or blank indicating the file is modified or clean,
- or + indicating the file is unread or has been read (in
the terminal, * means more than one window is open),
. or blank indicating the current file,
a blank,
and the file name.
* D file-list
Delete the named files from the menu. If no files are named, the cur‐
rent file is deleted. It is an error to D a modified file, but a sub‐
sequent D will delete such a file.
I/O Commands
* e filename
Replace the file by the contents of the named external file.
Set dot to the beginning of the file.
r filename
Replace the text in the range by the contents of the named ex‐
ternal file. Set dot.
w filename
Write the range (default 0,$) to the named external file.
* f filename
Set the file name and print the resulting menu entry.
If the file name is absent from any of these, the current file name is
used. e always sets the file name; r and w do so if the file has no
name.
< Plan 9-command
Replace the range by the standard output of the Plan 9 command.
> Plan 9-command
Send the range to the standard input of the Plan 9 command.
| Plan 9-command
Send the range to the standard input, and replace it by the
standard output, of the Plan 9 command.
* ! Plan 9-command
Run the Plan 9 command.
* cd directory
Change working directory. If no directory is specified, $home
is used.
In any of <, >, | or !, if the Plan 9 command is omitted the last Plan
9 command (of any type) is substituted. If sam is downloaded (using
the mouse and bitmap display, i.e. not using option -d), ! sets stan‐
dard input to /dev/null, and otherwise unassigned output (stdout for !
and >, stderr for all) is placed in /tmp/sam.err and the first few
lines are printed.
Loops and Conditionals
x/regexp/ command
For each match of the regular expression in the range, run the
command with dot set to the match. Set dot to the last match.
If the regular expression and its slashes are omitted, is as‐
sumed. Null string matches potentially occur before every char‐
acter of the range and at the end of the range.
y/regexp/ command
Like x, but run the command for each substring that lies before,
between, or after the matches that would be generated by x.
There is no default regular expression. Null substrings poten‐
tially occur before every character in the range.
* X/regexp/ command
For each file whose menu entry matches the regular expression,
make that the current file and run the command. If the expres‐
sion is omitted, the command is run in every file.
* Y/regexp/ command
Same as X, but for files that do not match the regular expres‐
sion, and the expression is required.
g/regexp/ command
v/regexp/ command
If the range contains (g) or does not contain (v) a match for
the expression, set dot to the range and run the command.
These may be nested arbitrarily deeply, but only one instance of either
X or Y may appear in a single command. An empty command in an x or y
defaults to p; an empty command in X or Y defaults to f. g and v do
not have defaults.
Miscellany
k Set the current file's mark to the range. Does not set dot.
* q Quit. It is an error to quit with modified files, but a second
q will succeed.
* u n Undo the last n (default 1) top-level commands that changed the
contents or name of the current file, and any other file whose
most recent change was simultaneous with the current file's
change. Successive u's move further back in time. The only
commands for which u is ineffective are cd, u, q, w and D.
(empty)
If the range is explicit, set dot to the range. If sam is down‐
loaded, the resulting dot is selected on the screen; otherwise
it is printed. If no address is specified (the command is a
newline) dot is extended in either direction to line boundaries
and printed. If dot is thereby unchanged, it is set to .+1 and
printed.
Grouping and multiple changes
Commands may be grouped by enclosing them in braces {}. Commands
within the braces must appear on separate lines (no backslashes are re‐
quired between commands). Semantically, an opening brace is like a
command: it takes an (optional) address and sets dot for each sub-com‐
mand. Commands within the braces are executed sequentially, but
changes made by one command are not visible to other commands (see the
next paragraph). Braces may be nested arbitrarily.
When a command makes a number of changes to a file, as in x/re/c/text/,
the addresses of all changes to the file are computed in the original
file. If the changes are in sequence, they are applied to the file.
Successive insertions at the same address are catenated into a single
insertion composed of the several insertions in the order applied.
The terminal
What follows refers to behavior of sam when downloaded, that is, when
operating as a display editor on a bitmap display. This is the default
behavior; invoking sam with the -d (no download) option provides access
to the command language only.
Each file may have zero or more windows open. Each window is equiva‐
lent and is updated simultaneously with changes in other windows on the
same file. Each window has an independent value of dot, indicated by a
highlighted substring on the display. Dot may be in a region not
within the window. There is usually a `current window', marked with a
dark border, to which typed text and editing commands apply. Text may
be typed and edited as in 8½(1); also the escape key (ESC) selects
(sets dot to) text typed since the last mouse button hit.
The button 3 menu controls window operations. The top of the menu pro‐
vides the following operators, each of which uses one or more 8½-like
cursors to prompt for selection of a window or sweeping of a rectangle.
`Sweeping' a null rectangle gets a large window, disjoint from the com‐
mand window or the whole screen, depending on where the null rectangle
is.
new Create a new, empty file.
zerox Create a copy of an existing window.
reshape
As in 8½.
close Delete the window. In the last window of a file, close is
equivalent to a D for the file.
write Equivalent to a w for the file.
Below these operators is a list of available files, starting with
~~sam~~, the command window. Selecting a file from the list makes the
most recently used window on that file current, unless it is already
current, in which case selections cycle through the open windows. If
no windows are open on the file, the user is prompted to open one.
Files other than ~~sam~~ are marked with one of the characters -+* ac‐
cording as zero, one, or more windows are open on the file. A further
mark appears on the file in the current window and a single quote, ',
on a file modified since last write.
The command window, created automatically when sam starts, is an ordi‐
nary window except that text typed to it is interpreted as commands for
the editor rather than passive text, and text printed by editor com‐
mands appears in it. The behavior is like 8½, with an `output point'
that separates commands being typed from previous output. Commands
typed in the command window apply to the current open file—the file in
the most recently current window.
Manipulating text
Button 1 changes selection, much like 8½. Pointing to a non-current
window with button 1 makes it current; within the current window, but‐
ton 1 selects text, thus setting dot. Double-clicking selects text to
the boundaries of words, lines, quoted strings or bracketed strings,
depending on the text at the click.
Button 2 provides a menu of editing commands:
cut Delete dot and save the deleted text in the snarf buffer.
paste Replace the text in dot by the contents of the snarf buffer.
snarf Save the text in dot in the snarf buffer.
look Search forward for the next occurrence of the literal text in
dot. If dot is the null string, the text in the snarf buffer is
used. The snarf buffer is unaffected.
<8½> Exchange snarf buffers with 8½.
/regexp
Search forward for the next match of the last regular expression
typed in a command. (Not in command window.)
send Send the text in dot, or the snarf buffer if dot is the null
string, as if it were typed to the command window. Saves the
sent text in the snarf buffer. (Command window only.)
External communication
On invocation sam creates a named pipe /srv/sam.user which acts as an
additional source of commands. Characters written to the named pipe
are treated as if they had been typed in the command window. This is
usually used to issue B commands from the shell.
B is a shell-level command that causes an instance of sam running on
the same terminal to load the named files. The option allows a line
number to be specified for the initial position to display in the last
named file.
Abnormal termination
If sam terminates other than by a q command (by hangup, deleting its
window, etc.), modified files are saved in an executable file,
$home/sam.save. This program, when executed, asks whether to write
each file back to a external file. The answer causes writing; anything
else skips the file.
FILES
$home/sam.save
$home/sam.err
/sys/lib/samsave
the program called to unpack $home/sam.save.
SOURCE
/sys/src/cmd/sam
source for sam itself
/sys/src/cmd/samterm
source for the separate terminal part
/rc/bin/B
SEE ALSO
ed(1), sed(1), grep(1), 8½(1), regexp(6).
Rob Pike, ``The text editor sam''.
SAM(1)