term% cat index.txt DC(1) General Commands Manual DC(1)
NAME
dc - desk calculator
SYNOPSIS
dc [ file ]
DESCRIPTION
Dc is an arbitrary precision desk calculator. Ordinarily it operates
on decimal integers, but one may specify an input base, output base,
and a number of fractional digits to be maintained. The overall struc‐
ture of dc is a stacking (reverse Polish) calculator. If an argument
is given, input is taken from that file until its end, then from the
standard input. The following constructions are recognized:
number The value of the number is pushed on the stack. A number is an
unbroken string of the digits 0-9A-F or 0-9a-f. A hexadecimal
number beginning with a lower case letter must be preceded by a
zero to distinguish it from the command associated with the let‐
ter. It may be preceded by an underscore _ to input a negative
number. Numbers may contain decimal points.
+ - / * % ^
Add subtract multiply divide remainder or exponentiate the top
two values on the stack. The two entries are popped off the
stack; the result is pushed on the stack in their place. Any
fractional part of an exponent is ignored.
sx
Sx Pop the top of the stack and store into a register named x,
where x may be any character. Under operation S register x is
treated as a stack and the value is pushed on it.
lx
Lx Push the value in register x onto the stack. The register x is
not altered. All registers start with zero value. Under opera‐
tion L register x is treated as a stack and its top value is
popped onto the main stack.
d Duplicate the top value on the stack.
p Print the top value on the stack. The top value remains un‐
changed. P interprets the top of the stack as an text string,
removes it, and prints it.
f Print the values on the stack.
q
Q Exit the program. If executing a string, the recursion level is
popped by two. Under operation Q the top value on the stack is
popped and the string execution level is popped by that value.
x Treat the top element of the stack as a character string and ex‐
ecute it as a string of dc commands.
X Replace the number on the top of the stack with its scale fac‐
tor.
[ ... ]
Put the bracketed text string on the top of the stack.
<x
>x
=x Pop and compare the top two elements of the stack. Register x
is executed if they obey the stated relation.
v Replace the top element on the stack by its square root. Any
existing fractional part of the argument is taken into account,
but otherwise the scale factor is ignored.
! Interpret the rest of the line as a shell command.
c Clear the stack.
i The top value on the stack is popped and used as the number base
for further input.
I Push the input base on the top of the stack.
o The top value on the stack is popped and used as the number base
for further output. In bases larger than 10, each `digit'
prints as a group of decimal digits.
O Push the output base on the top of the stack.
k Pop the top of the stack, and use that value as a non-negative
scale factor: the appropriate number of places are printed on
output, and maintained during multiplication, division, and ex‐
ponentiation. The interaction of scale factor, input base, and
output base will be reasonable if all are changed together.
z Push the stack level onto the stack.
Z Replace the number on the top of the stack with its length.
? A line of input is taken from the input source (usually the ter‐
minal) and executed.
; : Used by bc for array operations.
The scale factor set by k determines how many digits are kept to the
right of the decimal point. If s is the current scale factor, sa is
the scale of the first operand, sb is the scale of the second, and b is
the (integer) second operand, results are truncated to the following
scales.
+,- max(sa,sb)
* min(sa+sb , max(s,sa,sb))
/ s
% so that dividend = divisor*quotient + remainder; remainder has sign of dividend
^ min(sa×|b|, max(s,sa))
v max(s,sa)
EXAMPLES
Print the first ten values of n!
[la1+dsa*pla10>y]sy
0sa1
lyx
SOURCE
/sys/src/cmd/dc.c
SEE ALSO
bc(1), hoc(1)
DIAGNOSTICS
x where x is an octal number: an internal error.
`Out of headers' for too many numbers being kept around.
`Nesting depth' for too many levels of nested execution.
BUGS
When the input base exceeds 16, there is no notation for digits greater
than F.
Past its time.
DC(1)